IDS-400 ELECTROSURGICAL GENERATOR

IDS-400

Description

IDS technology gives the surgeon the flexibility to consistently choose the type of effect desired with maximum convenience and safety. The Bovie IDS Series are innovative electrosurgical generators with fully digital implementation for use in today’s modern OR and surgical outpatient center. The Bovie-IDS units are easy-to-handle yet capable of covering a whole spectrum of electrosurgical interventions. Monopolar and bipolar functions satisfy all surgical demands with maximum safety and a user-friendly interface. Bovie’s digital technology makes controlling the IDS Systems very simple for the OR team, allowing the surgeon to concentrate on what’s important – the operation and the patient.

FEATURES & SPECIFICATIONS

OVERVIEW

OVERVIEW

SAFETY IS DIGITALLY DESIGNED INSIDE

IDS technology meets the requirements of a variety of medical specialties, procedures, and indications in the modern OR.

BOVIEFDFS™ (FAST DIGITAL FEEDBACK SYSTEM)

The digitally controlled CUT and COAG functions give a consistent clinical output.

For the first time in electrosurgery, through digital technology, we are able to measure tissue impedance in real time (5000 times a second). As the impedance varies, the power is adjusted to deliver a consistent clinical effect.

BOVIENEM™ (NEUTRAL ELECTRODE MONITORING)

Improved patient safety with the latest digital implementation.

BOVIEFCFS™ (FIRST COME FIRST SERVED)

Discrete output design allows only one output device to be activated at any given time.

BOVIEDED™ (DIGITAL ERROR DETECTION)

Safety for the surgeon, OR staff, and patient. At the sign of any problem, the unit instantly disables the output, sounds an alarm and displays the appropriate error code.

IDS-400
SPECIFICATIONS

ENERGY SETTINGS

CUT

Cut I

A general cutting with a standard RF waveform used in open and endoscopic surgical procedure, Cut I is for use in a wide range of tissue with minimal hemostasis.

Cut II

Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output for the minimizing of the potential risk of capacitive coupling and alternate site burns due to weakened insulation.

Blend

Blended cutting offers varying levels of hemostasis during a cut providing increased control of bleeding at the surgical application site.

bovie-ids400-cut-interface_350x314

COAGULATION

Pinpoint

A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.

Spray

Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.

bovie-ids400-coag-interface_240x314

BIPOLAR

Bipolar coagulation which gently coagulates tissue for minimal tissue damage reducing carbonization and sticking.

bovie-ids400-bipoolar-interface_240x314

RECEPTACLE PANEL

Return Electrodes

Return Electrode Receptacle

Accepts a standard return electrode plug.

bovie-ids-400-receptacles-foot-control

Monopolar Footswitching Receptacle

Accepts cables or adapters equipped with standard active plugs. Connect footswitching accessories.

bovie-ids-400-receptacles-monopolar

Monopolar Handswitching Receptacle

Accepts standard 3-pin handpieces. Connect handswitching accessories.

bovie-ids-400-receptacles_bipolar

Bipolar Receptacle

Accepts standard cables for bipolar handpieces. Connect bipolar accessories.

TECHNICAL SPECS

TECHNICAL SPECS

MODE OUTPUT
POWER
OUTPUT
FREQUENCY
REPETITION
RATE
CREST FACTOR @
RATED LOAD
VPEAK
MAX
Cut I 400 W @ 500Ω 490 kHz ± 4.9 kHz N/A 1.6 ± 20% 1000V
Cut II 300 W @ 300Ω 490 kHz ± 4.9 kHz N/A 1.6 ± 20% 625V
Blend (Max) 200 W @ 300Ω 490 kHz ± 4.9 kHz 30 kHz ± 5 kHz 3.5 ± 20% 2000V
Pinpoint 120 W @ 500Ω 490 kHz ± 4.9 kHz 30 kHz ± 5 kHz 4.5 ± 20% 2400V
Spray 80 W @ 500Ω 490 kHz ± 4.9 kHz 30 kHz ± 5 kHz 6.5 ± 20% 4000V
Bipolar 120 W @ 150Ω 490 kHz ± 4.9 kHz N/A 1.6 ± 20% 450V

Duty Cycle:
10 S / 30 S

Output Type:
RF Isolated “F”

Output Frequency:
490 kHZ ±5

Input Current:
4.5 A ~

Line Voltage:
100-240 V ~

Weight:
<9.07 kg (<20 lbs)

Dimensions:
W – 37.5 cm (14.75 in)
H – 16.5 cm (6.5 in)
D – 46 cm (18.1 in)

Warranty:
4 years, Additional Warranty Available

4 year warranty

CE_Mark

ACCESSORIES

INCLUDED ACCESSORIES

PACKAGE INCLUDES

IDS-400

Bovie IDS-400 Electrosurgical Generator

110 Power Cord

110 VAC Hospital-Grade Power Cord (15ft.)

220 Power Cord

220 VAC Hospital-Grade Power Cord (15ft.)

IDS-400

User’s Guide in CD Format (MC-55-225-001)

RECOMMENDED ACCESSORIES

AVAILABLE ACCESSORIES INCLUDE

SCH10

SCH10 Handswitch Disposable Suction Coagulator

RESOURCES

BROCHURES

Top